|
IS-5000
MAGNETIC THERMAL GENERATOR
FEATURES
Instant
Start – No warm up time
Efficiency
– 50% to 80% more energy efficient than oil, gas or electric
heating methods
Remote
operation – The work coil may be remotely located from
the Magnetic Thermal Generator.
Cooling
– The Magnetic Thermal Generator is air cooled. The work
coil may be used with air or water cooling, depending on the
application.
APPLICATIONS
Forging
– A fast, economical method for heating small billets,
bars, tubing or fasteners for forging or forming operations.
Heat Treating
– Ideal for normalizing, hardening, tempering and annealing
of steel and stainless steel.
Brazing
and Soldering – Rapid brazing and soldering of parts
of all sizes. Also perfectly suited for de-soldering such
items as instrument cases for instrument repair.
Adhesive
Curing – Cures dissimilar metal joints, laps and metal
to non-metal contacts.
Paints
and Coatings – Rapid drying of low solvent metal finishes.
Spot drying after touch-up work.
SPECIFICATIONS
Output
Power
(KW) :5
Freq (HZ) :1.5K – 3K
Input
Voltage
(VAC) :208-240
Current (AMP): 50
Phase Single :(neutral required)
Freq (HZ) :50/60
Dimensions
Width
(inch) : 18
Depth (inch) : 15
Height (Inch) : 10.5
Weight (lbs) : 60
Controls
AC Power
Off/On
Start (Green)
Stop (Red)
Timed / Continuous
Time Set
Power Level
Indicators
Ready
- Power On (Green)
Heat (Yellow)
Fault (Red)
Equipment
List
IS 5000
Power Supply (1 ea)
Power Cable (1 ea)
Work Coil
Cables Optional
Foot Switch Optional
Work Coil(s) Optional
Please
call (818) 899-0047 or e-mail information@inductionsystems.com
to discuss your application.
|
